View MPF990NBSP_363573.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MPF930, MPF960, MPF990
Preferred Device
Small Signal MOSFET 2 Amps, 35, 60, 90 Volts
N-Channel TO-92
MAXIMUM RATINGS
Rating Drain-Source Voltage Drain-Gate Voltage Gate-Source Voltage - Continuous - Non-repetitive (tp 50 s) Drain Current Continuous (Note 1.) Pulsed (Note 2.) Total Device Dissipation @ TA = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VDS VDG VGS VGSM MPF930 35 35 MPF960 60 60 20 40 MPF990 90 90 Unit Vdc Vdc Vdc Vpk
http://onsemi.com
2 AMPERES 35, 60, 90 VOLTS RDS(on) = 0.7 (MPF930) RDS(on) = 0.8 (MPF960) RDS(on) = 1.2 (MPF990)
N-Channel D
Adc ID IDM PD 1.0 8.0 Watts mW/C 2.0 3.0 G
S TJ, Tstg -55 to 150 C TO-92 CASE 29 Style 22 12
Thermal Resistance JA 125 C/W 1. The Power Dissipation of the package may result in a lower continuous drain current. 2. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%.
3
MARKING DIAGRAM & PIN ASSIGNMENT
MPF930 YWW
1 Source 2 Gate Y WW
3 Drain
= Year = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
(c) Semiconductor Components Industries, LLC, 2000
1
November, 2000 - Rev. 3
Publication Order Number: MPF930/D
MPF930, MPF960, MPF990
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage (VGS = 0, ID = 10 Adc) V(BR)DSX MPF930 MPF960 MPF990 IGSS 35 60 90 - - - - - - - - 50 nAdc Vdc
Gate Reverse Current (VGS = 15 Vdc, VDS = 0)
ON CHARACTERISTICS (Note 2.)
Zero-Gate-Voltage Drain Current (VDS = Maximum Rating, VGS = 0) Gate Threshold Voltage (ID = 1.0 mAdc, VDS = VGS) Drain-Source On-Voltage (VGS = 10 Vdc) (ID = 0.5 Adc) MPF930 MPF960 MPF990 MPF930 MPF960 MPF990 MPF930 MPF960 MPF990 rDS(on) MPF930 MPF960 MPF990 ID(on) - - - 1.0 0.9 1.2 1.2 2.0 1.4 1.7 2.0 - Amps IDSS VGS(Th) VDS(on) - - - - - - - - - 0.4 0.6 0.6 0.9 1.2 1.2 2.2 2.8 2.8 0.7 0.8 1.2 1.4 1.7 2.4 3.0 3.5 4.8 - 1.0 - - 10 3.5 Adc Vdc Vdc
(ID = 1.0 Adc)
(ID = 2.0 Adc)
Static Drain-Source On Resistance (VGS = 10 Vdc, ID = 1.0 Adc)
On-State Drain Current (VDS = 25 Vdc, VGS = 10 Vdc)
SMALL-SIGNAL CHARACTERISTICS
Input Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Reverse Transfer Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Output Capacitance (VDS = 25 Vdc, VGS = 0, f = 1.0 MHz) Forward Transconductance (VDS = 25 Vdc, ID = 0.5 Adc) Ciss Crss Coss gfs - - - 200 70 20 49 380 - - - - pF pF pF mmhos
SWITCHING CHARACTERISTICS
Turn-On Time Turn-Off Time 2. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%. ton toff - - 7.0 7.0 15 15 ns ns
http://onsemi.com
2
MPF930, MPF960, MPF990
RESISTIVE SWITCHING
+25 V 23 PULSE GENERATOR 50 Vin 40 pF 1.0 M 20 dB 50 ATTENUATOR TO SAMPLING SCOPE 50 INPUT Vout OUTPUT V INVERTED out 90% 10 V INPUT Vin 50% 10% PULSE WIDTH 50% ton 90% toff 90% 10%
50
Figure 1. Switching Test Circuit
Figure 2. Switching Waveforms
ORDERING INFORMATION
Device
MPF930 MPF930RLRE MPF930A MPF930ARLRE MPF960 MPF960RLRA MPF990 MPF990RLRA MPF990RLRP
Package
TO-92 TO-92 TO-92 TO-92 TO-92 TO-92 TO-92 TO-92 TO-92
Shipping
1000 Unit/Box 2000 Tape & Reel 1000 Unit/Box 2000 Tape & Reel 1000 Unit/Box 2000 Tape & Reel 1000 Unit/Box 2000 Tape & Reel 2000 Ammo Pack
http://onsemi.com
3
MPF930, MPF960, MPF990
V DS , DRAIN-SOURCE VOLTAGE (VOLTS) 10 5.0 C, CAPACITANCE (pF) VGS = 10 V 2.0 1.0 0.5 0.2 0.1 -55 -35 -15 85 105 +5.0 25 45 65 TJ, JUNCTION TEMPERATURE (C) 125 145 200 180 160 140 120 100 80 60 40 20 0 0 5.0 Crss 10 20 30 40 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 50 Ciss Coss VGS = 0 V
Figure 3. On Voltage versus Temperature
Figure 4. Capacitance Variation
2.4 ID(on), DRAIN CURRENT (AMPS) VDS = 10 V ID(on), DRAIN CURRENT (AMPS) 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 0 1.0 6.0 7.0 8.0 2.0 3.0 4.0 5.0 VGS, GATE-SOURCE VOLTAGE (VOLTS) 9.0 10
2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 0 5.0
VGS = 10 V 9.0 V 8.0 V 7.0 V 6.0 V 5.0 V 4.0 V 10 20 30 40 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 50
Figure 5. Transfer Characteristic
Figure 6. Output Characteristic
2.8 ID(on), DRAIN CURRENT (AMPS) 2.4 2.0 1.6 1.2 0.8 0.4 0.2 0 0.5
VGS = 10 V 9.0 V 8.0 V 7.0 V 6.0 V 5.0 V 4.0 V 3.0 V
1.0 2.0 3.0 4.0 VDS, DRAIN-SOURCE VOLTAGE (VOLTS)
5.0
Figure 7. Saturation Characteristic
http://onsemi.com
4
MPF930, MPF960, MPF990
PACKAGE DIMENSIONS
TO-92 CASE 29-11 ISSUE AL
A R P L
SEATING PLANE
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 ---
K
XX G H V
1
D J C SECTION X-X N N
DIM A B C D G H J K L N P R V
STYLE 22: PIN 1. SOURCE 2. GATE 3. DRAIN
http://onsemi.com
5
MPF930, MPF960, MPF990
Notes
http://onsemi.com
6
MPF930, MPF960, MPF990
Notes
http://onsemi.com
7
MPF930, MPF960, MPF990
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
8
MPF930/D

▲Up To Search▲

Price & Availability of MPF990NBSP

	To Download MPF990NBSP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .